From small nail holes to major water damage — what DFW homeowners actually pay and what drives the final price.
Drywall repair is one of the most common home repair jobs in the Dallas area — and also one of the most widely misunderstood when it comes to pricing. Homeowners often either overpay by calling large companies with high overheads, or underpay for a quick patch that doesn't hold up and needs to be redone.
This guide breaks down real drywall repair costs in the Dallas–Fort Worth area for 2025, what affects the price, and how to know whether a job is worth doing yourself or calling a professional.
| Type of repair | Typical cost (DFW area) |
|---|---|
| Small nail holes / screw pops (1–5 holes) | $75–$150 |
| Small hole repair (up to 4 inches) | $100–$200 |
| Medium hole (4–12 inches) | $175–$350 |
| Large hole / full panel replacement | $300–$600 |
| Water damage repair (per affected area) | $400–$1,200 |
| Crack repair and retexture | $150–$400 |
| Popcorn ceiling removal (per room) | $300–$800 |
| Full ceiling skim coat (per room) | $400–$900 |
The most obvious factor. A single nail hole takes minutes; a 2-foot section of water-damaged drywall requires cutting out the old material, replacing the backing, hanging new board, taping, bedding, drying, sanding, texturing, and painting. More steps = higher cost.
In the Dallas area, most homes have a textured finish — orange peel, knockdown, skip trowel, or splatter. Matching texture properly takes skill and adds time to every repair. If a contractor doesn't match it, the patch will show through the paint. Good texture matching is worth paying for.
Many drywall repair quotes cover the patch and texture but not the final paint coat. Make sure you know what's included. We can paint to match if needed — just ask when you call for your estimate.
If drywall got wet from a roof leak, plumbing issue, or AC condensate, there may be mold or damaged studs behind it. This adds remediation and structural repair costs on top of the drywall work itself. Always fix the source of moisture before closing the wall.
Proper drywall tape and bed work requires at least two or three coats of compound, with drying time between each. Rushing this step causes cracks later. A quality repair job may span two visits to do it correctly.
For very small holes — nail holes, small anchor dents under 2 inches — a patch kit from Home Depot works fine and is genuinely worth doing yourself. The materials cost $10–$20 and there are solid tutorials on YouTube.
However, DIY fails for most DFW homeowners because of texture matching. Getting knockdown or orange peel to match an existing wall is not easy. It takes practice, the right tools, and knowledge of how spray patterns change as compound dries. Most DIY texture patches are visible — especially after painting.
For anything larger than a 2-inch hole, or any job where the texture needs to match, calling a professional is almost always worth it. The cost difference between a botched DIY job and a professional repair is often just $100–$200 — and the professional version is invisible.
Standard drywall repairs — patching holes, replacing damaged sections — do not require a permit in Dallas or surrounding Texas cities. Permits are only required when you're modifying the structural elements of the wall, doing electrical work behind the drywall, or making significant additions to the home's square footage.
Call or text Juan at (214) 403-4257. We cover Dallas, Irving, Grand Prairie, Arlington, Fort Worth, and the wider DFW Metroplex.
Request free estimate